Nylon-X

[last updated: 2021-09-22]
go to: 3d printing home page
-----

• (link to:) MatterHackers product page
• Nylon-12 filament with ~ 10-15% (by wt) chopped carbon fibers
• Properties:
  Density ~ 1.35 g/cm3
  0.5kg spool ~ 682 ft = 208 m
  High stiffness, impact resistance, and tensile strength.
  Stability and rigidity prevent warping.
  Hygroscopic - must be kept dry
  Bake at 180F 4-6 hrs if needed

• Printing parameters::
  Nozzle: 250 - 265C
  Bed: 60 - 65C (w/ glue stick)
  Print speed: 25 - 35 mm/sec
  Print cooling fan: off
• Recommended Nozzle:
  Stainless Steel, Olsson Ruby, or other hardened nozzle types
  Larger nozzles (0.6mm +) will give much stronger parts.
• Tips:
  • From forum: "a light coat of 'Garnier Fructis Style Extreme Control Anti-Humidity Hairspray, Extreme Hold' "
  • Glue with: Taulman ComPlete Nylon Glue $24/25g
    or use a hot glue gun,
    or use silicone caulk and clamp to dry.

.

.

.

eof