DSO Nano scope

[last updated: 2024-09-06]
...
-----

• This is the Seeed Studio DSO Nano oscilloscope with a built-in signal generator

• Startup procedure:
  Probe cable plugged into connector on left (at top).
  Power on switch on right side - up is on.
  Opening/logo screen displays:
  DSO201 Oscilloscope LIB Ver 2.22
  DSO201 Oscilloscope APP Ver 2.40
• Menu and Controls:
  • On power up, the AUTO menu item (top left of screen) will be highlighted and blinking.
    Pressing right-arrow will progress through other menu options.
    First is vertical scale (default 1v/div)
    Next is horiz (timebase) scale (default 200 us/div)
    Pressing up or down arrows in either V or H scale option will allow setting desired parameter.
  • Continuing to press right-arrow will progress through the other menu options:
    not sure about some of them at this time...
  • Pressing "A" button on top will toggle between "Run" and "Hold" (icon in bottom right of display)
    "Hold" is basically a single-shot trace.
  • ..."B" button ...

• Operation:
  • From AUTO menu icon, click down arrow to select SCAN operation.
    In this mode the DSO will act like a "normal" oscilloscope.
  • Adjust vertical position of trace:
    right-arrow to "Y-POS" in top menu bar
    press and hold up or down arrows as desired

.

.

.

eof