Prusa firmware - upgrade to 3.9.1

[last updated: 2022-11-23]
go to: 3d printing home page
go to: Prusa Firmware home page
-----

Detailed steps for updating Prusa Mk3 firmware:

• Prusa instructions:
  (link to:) Prusa - Firmware updating (MK3S/MK3)
  --------------------------------
  • Download the firmware software:
  • Go to (link to:) Drivers page
  • Scroll to find "Original Prusa I3 Mk3"
  • Under "Firmware 3.9.1", click Download
  • Select Save file
    On my Linux system this put the zip file (prusa3d_fw_3_9_1_MK3.zip) into the downloads folder
    I created a folder (Tech/3dPrinting/Prusa/software/firmware/prusa3d_fw_3_9_1_MK3) and put the zip file there
  • Update printer firmware:
  • Connect USB cable between your computer and the printer.
    Turn on the printer.
  • Open PrusaSlicer
  • Configuration (top menu bar) > Flash printer firmware
    If your printer is not listed in the "serial port" field, press ReScan
  • Click browse icon at far right of the Firmware image field, and navigate to your downloaded and unzipped firmware folder
    select: prusa3d_fw_MK3_3_9_1...hex, then Open
  • click Flash!
  • when "Flashing succeeded," click Close
  • disconnect USB cable
  • LCD Menu - Support should show new version of firmware

.

.

.

eof